Steel mesh is usually made of high quality low carbon iron wire and stainless steel wire, it is a new type of building reinforcement material, using steel mesh in the building construction process will make the building stronger and more stable. It has the characteristics of heat insulation, sound insulation, earthquake resistance, waterproof, simple structure and light weight, so steel mesh is widely welcomed in the market.

In engineering construction, in order to improve the seismic performance of reinforced concrete structure, the steel mesh adopts a uniform stress mesh structure, which greatly improves the seismic performance of reinforced concrete structure. The current design strength of the steel mesh is 210n / mm (flat steel) and the design strength of the ordinary welded mesh is 360n / mm (flat steel). Based on the principle of strength replacement and comprehensive consideration, we found that using steel mesh for construction can save 30% of steel consumption and save a lot of engineering cost.

Stencil is a solid steel mesh structure formed by welded steel chains. The screen sizes are Type A: 30mm * 30mm, Type B: 20mm * 20mm, Type C: 30mm * 20mm, Type D: 10mm * 10mm, Type E: 20mm * 15mm, and Type F: 10mm * 15mm.

The steel wire diameter of the steel mesh is usually 4-14mm, the maximum width is 2.4m and the maximum length is 12m.

Galvanized steel wire mesh sheet ensures the quality of project construction. The steel sheets are produced by an intelligent system production line with automated technology, which strictly controls the production size as well as the specification and quality of galvanized steel mesh to avoid mistakes caused by sloppy work of workers. Welded wire mesh can make the construction easier. The presence of steel mesh speeds up the construction progress of the project, as long as the mesh is arranged according to the regulations, concrete can be poured directly, which can save 20% to 50% of the working time, greatly accelerating the project progress and shortening the construction period. In addition, the use of welded wire mesh can significantly improve the safety performance of buildings, resulting in a project pass rate of over 99% and a 50% increase in construction speed.

The steel mesh helps to improve the shear strength and bending strength of concrete, reduce concrete cracks, and prevent local dislodgement. The distance of concrete reinforcing mesh is 150300mm, and the overlap length between it and steel plate should be less than or equal to 30d, and the diameter and spacing of steel plate should be determined according to the load level of the building.

The use of concrete reinforcing mesh can speed up the construction process because it does not require cutting and tying during construction, thus saving man-hours and speeding up the project progress.